Verizon MHS700L Saw User Manual


 
11
Using Your Jetpack after Setup is Complete
Mobile Hotspot to share connections
You can use the Jetpack as a wireless mobile hotspot to connect up to a total of eight Wi-Fi
capable devices to the mobile broadband network.
Wi-Fi and Web UI Admin Security
The Jetpack comes from the factory with security turned on. By default your Wi-Fi and Admin
Password are the same. Your Admin Password will always be the same as your Wi-Fi
Password unless you create a separate Admin Password in the Web User Interface. If you
change your Wi-Fi Password, your Admin Password changes as well.
To create a separate password for signing in to the Web User Interface in order to change
settings on this device, a new Admin Password must be created. After you create the Admin
Password, you will be required to use one password to connect with the Jetpacks Wi-Fi network
and one password to Sign In to the http://my.Jetpack Web User Interface.
You can change the security settings using the Jetpack Web User Interface (Web UI). To
change your Jetpack security settings:
1 Connect your Wi-Fi capable device to the Jetpack.
2 Open a web browser on your connected device and enter http://my.jetpack or
http://192.168.1.1.
3 Click on Sign In, enter your password in the Admin Password box, and then click
Sign In. (Click the Power/Menu button quickly three times to see password)
4 To change Web UI Admin Password, see page 20 of this guide.
5 To change Wi-Fi Password, see page 24 of this guide.
Monitoring Data Usage
You can monitor your data usage from your Jetpack. Press the Power/Menu button one time to
see data usage, and when your billing cycle ends.
You can also monitor your data usage detail from your My Jetpack Home page at
http://my.jetpack or by selecting the Data Usage link (see page 16 of this guide).