Filter
Top Products
English
Table of Contents
General Description ................................................................2
Safety Precautions..................................................................2
Grounding Instructions ..........................................................3
Extension Cord Selection......................................................4
Operation .................................................................................4
Purging and Priming..............................................................4
Operating the Spray Gun ......................................................5
Spraying...................................................................................6
Spraying Technique...............................................................6
Practice..................................................................................6
Cleanup....................................................................................6
Flushing the Unit ...................................................................7
Maintenance ............................................................................7
Daily Maintenance.................................................................7
Maintaining the Fluid Section ................................................7
Cleaning the Spray Tip..........................................................9
Cleaning the Filter .................................................................9
Choosing the Correct Spray Gun Filter.................................9
Accessories.............................................................................9
Troubleshooting....................................................................10
Limited Warranty ...................................................................11
Français .................................................................................12
Español ..................................................................................22
Parts Listings ........................................................................32
Main Assembly ....................................................................32
Filter Assembly (Optional) ...................................................33
Drive Assembly....................................................................34
Pressure Control Assembly.................................................36
Fluid Section Assembly ......................................................37
Spray Gun ...........................................................................38
Suction Set Assembly..........................................................38
Prime/Spray Valve Assembly...............................................39
Transducer Assembly ..........................................................40
Relay ...................................................................................40
Pressure Control Assembly Wiring Diagram.......................40
General Description
This high performance piston pump is a precision power tool
used for spraying many types of materials. Read and follow
this instruction manual carefully for proper operating
instructions, maintenance and safety information.
SP
RA
Y
PR
IM
E
ON / OFF Switch
Pressure Control Knob
Suction Set
Return Tube
Intake Screen
PRIME / SPRAY Knob
2 © SprayTECH Corporation. All rights reserved.
Safety Precautions
This manual contains information which must be read and
understood before using the equipment. When you come to an
area which has one of the following symbols, pay particular
attention and make certain to heed the safeguard.
This symbol indicates a potential hazard which may cause
serious injury or loss of life. Important safety information will
follow.
This symbol indicates a potential hazard to you or to the
equipment. Important information that tells how to prevent
damage to the equipment or how to avoid causes of minor
injuries will follow.
HAZARD: INJECTION INJURY - A high pressure stream
of paint produced by this equipment can pierce
the skin and underlying tissues, leading to
serious injury and possible amputation.
PREVENTION:
• The maximum operating range of the unit is 3000 PSI fluid
pressure.
• NEVER aim the gun at any part of the body.
• NEVER allow any part of the body to come in contact with
the fluid stream. DO NOT come in contact with a fluid
stream created by a leak in the fluid hose.
• NEVER put your hand in front of the gun. Gloves will not
provide protection against an injection injury.
• ALWAYS lock the gun trigger, shut the fluid pump off and
release all pressure before servicing, cleaning the tip
guard, changing tips, or leaving unattended. Pressure will
not be released by turning off the engine. The
PRIME/SPRAY knob must be turned to PRIME to relieve
the pressure. Refer to the PRESSURE RELIEF
PROCEDURE described in this manual.
• The tip guard must always be in place while spraying. The
tip guard provides some protection against injection
injuries but is mainly a warning device.
• ALWAYS remove the spray tip before flushing or cleaning
the system.
• The paint hose can develop leaks from wear, kinking and
abuse. A leak is capable of injecting material into the skin.
Inspect the paint hose before each use.
• NEVER use a spray gun which does not have a trigger
lock or trigger guard in place and in working order.
• All accessories must be rated at or above 3000 PSI. This
includes spray tips, guns, extensions, and hose.
• In case of skin injection see physician immediately.
NOTE TO PHYSICIAN:
Injection into the skin is a traumatic injury. It is
important to treat the injury surgically as soon as
possible. DO NOT delay treatment to research toxicity.
Toxicity is a concern with some coatings injected
directly into the blood stream. Consultation with a
plastic surgeon or reconstructive hand surgeon may be
advisable.
DO NOT TREAT AN INJECTION INJURY AS A
SIMPLE CUT! Injection can lead to
amputation. See a physician immediately.
WARNING
NOTE: Notes give important information which should
be given special attention.
CAUTION
WARNING