Filter
Top Products
36
OPERATING MANUAL
VERSION 03/2013 ORDER NUMBER DOC 2310799
Note:
Before each lling, the nozzle must be removed from the pistol. The data in the gun's
operating manual are to be observed.
In case of AirCoat systems, carry out the lling of the system without atomizing air (8).
1 Place empty container (5) under return tube (4).
2 Place suction hose (7) in the container with working material (6).
3 Open return valve (3).
4 Slowly open the ball valve (2).
5 Adjust the air pressure on the pressure regulator (1) so that the pump runs smoothly.
6 Spray until clean working material ows into the container (5).
7 Close ball valve (2).
8 Close return valve (3).
9 Point the gun (9), without nozzle, into container (5) and open it.
10 Slowly open the ball valve (2).
11 Spray until clean working material ows from the gun (9).
12 Close ball valve (2).
13 Relieve the system pressure, either by opening the return valve (3) or via the trigger
on the gun (9).
14 When there is no pressure remaining in the system, close the gun (9) or the return
valve (3).
15 Secure the gun.
16 Dispose of the contents of the container (5) according to the local regulations.
7 OPERATION
7.1 FILLING WITH WORKING MATERIAL