Filter
Top Products
40
OPERATING MANUAL
VERSION 03/2013 ORDER NUMBER DOC 2310799
7.3 LONGTERM STORAGE
When storing the device for longer periods of time, it is necessary to thoroughly clean it
and protect it from corrosion. For the last rinse, replace the water or solvent in the material
pump with a suitable preservative. Fill separating agent cup with separating agent. Store
pump vertically.
Procedure:
1 Chapter 7.2.3 "Decommissioning and Cleaning", perform points 1 to 7.
2 Flush with preservative according to Chapter 6.5.3 and paint supplier's instructions.
3 If the discharge duct is to be removed, seal material outlet with plug.
4 If the suction system is to be removed, seal material inlet with plug.