Filter
Top Products
6
GB
Setting the spray jet width (fig. 4)
Adjusting ring
Turn to the right = wider spray jet
Turn to the left = narrower spray jet
Note:
The adjusting ring does not fasten the air cap!
4
Setting the amount of material (fig. 5)
Set the amount of material by turning the material adjustment
knob.
Turn to the left = more material
Turn to the right = less material
5
Setting the amount of air (fig. 6)
The correct setting for the amount of air is decisive for the
atomization and formation of paint mist.
Maximum
Minimum Minimum
6
Setting the ascending feed pipe
Spraying object lying on oor (g. 7)
Turn rotating lever clockwise as far as it will go.
7
Spraying object over head (g. 8)
Turn rotating lever anti-clockwise as far as it will go.
8