Filter
Top Products
9
GB
Spray gun accessories and spare parts
Nozzle sets:
The spray nozzle set consists of an air cap, a tip and a needle
(g. 17).
Air cap
Tip
Needle
4
4
4
17
Table of nozzle sets
Set (complete)
Marking Part No. Tip size
2 0276 254 Ø 0,8 mm
3 0276 227 Ø 1,3 mm
4 0276 228 Ø 1,8 mm (Standard)
5 0276 229 Ø 2,2 mm
6 0276 245 Ø 2,5 mm
7 0524 211 Ø 2,7 mm
8 0261 021 Ø 3,0 mm
9 0261 022 Ø 4,0 mm
Hose whip 152 cm long
Part No. 0524 405
Valve plate set for non-return valve
10 pcs. Part No. 0277 919
Service-Set
consisting of seal item 5, page 12, seal item 8, seal item 17,
needle seal item 27, air pipe item 32, non-return valve item 34,
air pipe item 35, paint container seal item 49.
Part No. 0295 981
Turbo-blower maintenance
1. Changing air lter and motor air lter
The indicator lamp (1) shows that the air lter (2) and the
motor air lter (3) need cleaning or exchanging.
Turn off turbo-blower.
Remove the air lter (2) and motor air lter (3) from the
turbo-blower.
Depending on how dirty the lters are, either clean by
blowing through compressed air or exchange the lters.
Care must be taken when retting the air lter (2) that the
green side is on the inside.
2
1
3
18
Air lter and motor air lter
Part No. 0279 938
2. Carbon brushes
The carbon brushes of the turbo-blower must be replaced
once per year or every 500 hours of operation.
Please contact your WAGNER service center.