Filter
Top Products
GB
17
W 687 E
1. Workplace
Keep your workplace clean and tidy. a) Untidiness and unlit working areas can lead
to accidents.
Never use the tool in hazardous areas that contain ammable liquids, gases b)
or dusts. Power tools generate sparks that can ignite the dust or vapors.
Keep children and other persons away when using the power tool. c) You can
lose control of the tool if you are distracted.
2. Electrical Safety
The tool plug must t into the socket. The plug may not be modied inany a)
form. Do not use adaptor plugs together with protective-earthed tools.
Unmodied plugs and suitable sockets reduce the risk of an electric shock.
Avoid physical contact with earthed surfaces such as pipes, heating b)
elements, stoves and refrigerators. The risk through electric shock increases if
your body is earthed.
Keep the equipment away from rain and moisture. c) The risk of an electric shock
increases if water penetrates electrical equipment.
Do not misuse the mains lead by carrying the tool by the lead, hanging it d)
from the lead or by pulling on the lead to remove the plug. Keep the lead
away from heat, oil, sharp edges or moving tool parts. Damaged or twisted
leads increase the risk of an electric shock.
If you work outdoors, use only extension leads that are approved for e)
outdoor use. The use of an extension lead that is suitable for outdoors reduces the
risk of an electric shock.
3. Safety of Persons
Be attentive. Pay attention to what you are doing and work sensibly with a)
apower tool. Do not use the tool if you are tired or under the inuence of
drugs, alcohol or medication. Just a moment of inattentiveness while using the
tool can lead to serious injuries.
Wear personal safety equipment and always wear safety goggles b) Wearing
personal protective equipment, such as dust mask, non-slip safety shoes, safety helm
or ear protection, depending on the type of power tools, reduces the risk of injury.
Avoid accidental starting-up. Ensure that the switch is in the "OFF" position c)
before inserting the plug into the socket. Accidents can occur if you carry the
power tool while your nger is on the switch or if you connect the power tool to the
power supply which it is on.
Remove setting tools or wrenches before switching on the power tool. d) A tool
or wrench that is in a rotating tool part can lead to injuries.
Do not overestimate your abilities. Ensure that you are standing securely e)
and have your balance at all times. This ensures that you can control the tool
better in unexpected situations.