Filter
Top Products
GB
19
W 687 E
CAUTION:
Danger of injury! Never point the spray stream towards human
beings or animals.
The spray gun is to be used only for paints and solvents with a 21°C (32° in UK) ashpoint
•
or higher (See information on the material tin. Hazard class A II and A III permitted).
Do not use the spray guns to spray ammable substances.
•
The spray guns are not to be cleaned with ammable solvents which have a ashpoint
•
under 21°C.
Caution against dangers that can arise from the sprayed substance and observe the
•
text and information on the containers or the specications given by the substance
manufacturer.
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
•
regulations.
To avoid the hazard of explosion when spraying, provide for eective natural or articial
•
ventilation.
There must be no sources of ignition such as, for example, open res, smoke of lit
•
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
•
with it.
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are
•
not to be sprayed. When working keep in mind that wind, for example,
may transport paint mist over great distances and cause damage.
The units may only be used with a functional valve.
•
If paints rises in the ventilating hose
(Fig. 13, item A) do not operate the unit further! Dismantle and clean the ventilating
hose, valve and diaphragm and replace the diaphragm if necessary.
Do not lay the spray gun.
•
The device is equipped with a thermal release which disconnects the device in case of
•
overheating. In this case, turn o the device, remove the plug and let the device cool
down for at least 1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled air lter,
slots for air intake covered.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fullled.
Technical Data
Max. viscosity 170 DIN-s
Max. ow rate:
Interior wall paint
Varnish paints, glazes, etc.
375 ml/min
200 ml/min
Power source 230 V
~
Power consumption 570 W
Atomizing output: 130 W
Double insulation
Sound pressure level L
WA
= 77 dB (A); K
WA
= 4 dB
Sound pressure output L
pA
= 90 db (A); K
pA
= 4 dB
Oscillation level < 2.5 m/s
Air hose length 3.5 m