Filter
Top Products
GB
20
W 687 E
Technical Data
Weight approx. 3.0 kg
Description (Figs. 1)
Air cap 1) Tip2)
Union nut 3) Perfect Spray spray attachment4)
Trigger guard 5) Material volume regulation6)
Gun handle 7) ON/OFF switch 8)
Carry handle 9) Air volume control10)
Air hose11) Power cable12)
Cover of air lter compartment13) Air lter14)
Gun holder 15) Container (800 ml)16)
Valve17) Ventilating hose 18)
Carrying belt19) WallPerfect spray attachment20)
Stirring rod21) Feed hopper (2 pcs.)22)
Replacement nozzle seal (3 pcs.)23) Practice poster24)
Operatimg instructions25) Lubricating grease (without illustration)26)
Field of application
Many dierent coating substances can be processed with the W687 E.
A dierent spray attachment must be used, depending on the coating substance:
Coating Materials Spray attachment
Low-viscosity coating substances:
Water- and solvent-based paints, nishes,
primers, 2-component paints, clear
nishes, automotive nishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Perfect Spray (anthracite)
Interior wall paint (dispersions and latex
paint)
All coating materials with the green
Perfect Spray logo
WallPerfect (white)
Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
Water- and solvent-based paints, nishes, primers, 2-component paints, clear nishes,
automotive nishes, staining sealers and wood sealer-preservatives.
Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances. Materials with a ash point below 21°C.