Filter
Top Products
Operating AC Appliances
975-0218-01-01 17
To operate an AC appliance:
1. Open the protective covering on the right side of the
XPower Powerpack. Turn the AC Outlet On/Off switch
to the On position.
The switch illuminates to indicate AC power is available
at the AC Outlets.
2. Plug the AC appliance into one of the AC Outlets and
turn the appliance on. XPower Powerpack will operate
most devices rated up to 320 W.
3. Recharge the XPower Powerpack as soon as possible
after each use.
When using the XPower Powerpack to operate an AC
appliance and the low battery warning sounds, the
warning gives you time to shut your AC appliance off
before loss of AC power.
If you ignore the warning, the XPower Powerpack
automatically turns off a few minutes later to prevent
battery damage.
In the event of an overload, low battery voltage or
overheating, the XPower Powerpack automatically shuts
down.