Filter
Top Products
Using the Air Compressor
975-0218-01-01 25
To inflate small sports equipment:
1. Place the valve connector fully on or into the valve
receptacle on the item. Go to Step 4.
OR
If necessary, use a supplied nozzle adaptor.
2. Choose the appropriate nozzle adaptor, insert the nozzle
adaptor into the valve stem and close the thumb latch.
3. Insert nozzle adaptor into the valve receptacle of the
item.
4. Turn the compressor on and inflate to appropriate
pressure.
5. Turn the compressor off before removing nozzle adaptor
from valve stem.
6. Remove nozzle adaptor from valve connector and store
in storage compartment.
CAUTION
The XPower Powerpack cannot be used to inflate large
capacity inflatables such as float tubes, large air
mattresses, and inflatable boats. These types of products
require extended inflating times which may damage the
compressor.
WARNING: Fire hazard
Allow the compressor to cool down for 10 minutes after
each 10 minutes of continuous operation.
Note
: Leave the thumb latch in the open position for storing to
relieve pressure on the internal mechanism.