Xantrex Technology 400 PLUS Battery Charger User Manual


 
Important Safety Instructions
975-0218-01-01 v
WARNING: Fire hazard
Jump-start cable clips must be connected positive to
positive (red clip to battery “+”) and negative to negative
(black clip to battery “”). A reverse polarity connection
(positive to negative) may cause damage to the unit and/or
create a sparking/explosion hazard.
WARNING: Fire hazard
The jump-start feature is designed for short term operation
only—less than 4 seconds. Operating the jump-start
feature for more than 4 seconds may cause damage to the
unit. Allow the XPower Powerpack 400 Plus to cool down
for at least 3 minutes after each jump-start.
WARNING: Risk of explosion, fire or
burns
The battery terminals exposed at the Jump-Start Cable
Port have enough energy present to cause a spark, creating
an explosion hazard, or to cause burns if a metal object
contacts both terminals. Always clip the plastic guard over
the port when not in use.
WARNING: Fire hazard
Do not leave the compressor unattended while operating.
The compressor is designed for short term operation only.
Operation of the compressor over an extended period of
time will cause the compressor unit to overheat and may
cause damage. Allow the compressor to cool down for 10
minutes after each 10 minutes of continuous operation.