Filter
Top Products
Operation
24 975-0218-01-01
To inflate your vehicle, motorcycle, or bicycle tyres:
1. Place the valve connector securely on the tyre valve stem,
push it as far as possible to allow normal airflow, and
close the thumb latch. If necessary, use a supplied nozzle
adapter.
2. Turn the compressor on, and inflate your tyre to the
recommended pressure. Use Table 3-3 as a guide only.
3. Turn the compressor off after appropriate pressure is
reached.
4. Open the thumb latch and remove the valve connector
from the valve stem.
5. Check air pressure with a pressure gauge.
Inflating Small Sports Equipment
You can use the compressor to inflate small sports equipment
such as footballs.
Note: The information in the table is for reference only. For
precise pressure specifications, refer to the information supplied
with the article to be inflated.
CAUTION
If the pressure gauge on the compressor indicates more
than twice the recommended pressure for the object you
are inflating, and you have only started to inflate the
object, the valve connector is incorrectly connected to the
valve stem. This may damage the XPower Powerpack 400
Plus. Remove and reattach the valve connector to the
valve stem.
Note
: Leave the thumb latch in the open position for storing to
relieve pressure on the internal mechanisms.