Xantrex Technology 400 PLUS Battery Charger User Manual


 
Recharging the XPower Powerpack Battery
975-0218-01-01 31
the DC Charging Cable to recharge from your vehicle as
you drive.
a generator equipped with a regulated 12 V battery
charging outlet.
a solar panel.
Recharging with the AC Charger
Recharging with the AC Charger is a true “plug-in-and-
forget” charging method.
To recharge with the AC Charger:
1. Disconnect any 12 V DC appliance and turn the light
switch to Off.
2. Turn the AC Outlet On/Off switch to Off.
3. Plug the AC Charger into a standard AC wall outlet.
4. Insert the AC Charger cable end into the Charger Input
Socket located in the charger storage compartment.
5. While the XPower Powerpack is recharging, the green
Charging Status light is flashing. If the battery is
completely discharged, a typical recharge may take up to
40 hours. When fully charged, the green Charging
Status light changes to steady and the XPower
Powerpack is ready to use.
CAUTION
Do not operate AC or DC appliances while the XPower
Powerpack is being recharged with the AC Charger.
The AC Charger may be permanently damaged if AC
appliances or 12 V DC appliances are operated while the
AC Charger is connected.