Filter
Top Products
4–4 975-0390-01-01
Operating in Inverter Mode
The Freedom HF is in inverter mode when shore power is not presently
available and the unit is using the battery (inverting DC to AC) to power
the appliances connected to the Freedom HF.
The Yellow status LED lights up to indicate the Freedom HF is using the
battery to power the appliances.
The table below illustrates the battery status during inverter mode as
shown on the display panel.
Turning the Inverter Function On and Off
The Inverter button on the display panel turns the Freedom HF’s Inverter
function ON and OFF. To operate, press the button and hold for one
second.
When shore power is NOT present:
• the AC outlets will supply power to any attached appliances when the
Inverter button is turned ON, and
• the AC outlets will not supply power to any attached appliances when
the Inverter button is turned OFF.
To prevent unnecessary battery discharge, turn the Inverter button off
when you are not using the Freedom HF.
WARNING: Shock hazard
Turning the Inverter button OFF does not disconnect DC battery power from the
Freedom HF. You must disconnect both AC and DC power before working on
any circuits connected to the Freedom HF.
Freedom HF Owners Guide.book Page 4 Friday, December 21, 2007 2:18 PM