Filter
Top Products
Operating Features
975-0337-01-01 1–3
Location Ignition protection for safe operation in applications that require ignition
protected equipment such as gasoline engine rooms or in a battery box.
Ingress protected (IP66) for wet applications where the inverter will be
cleaned with low pressure jets of water.
Operating Features
Inverter/charger
The inverter/charger functions as an inverter or as a charger depending
upon the operational conditions. When the unit is inverting, it is said to be
in invert mode and is referred to as an inverter. When the unit is charging,
it is in charge mode and is referred to as a charger.
The unit can only operate in charge mode when external AC power
referred to as “shorepower” is connected.
Inverter
features
The IP1012 AL offers the following inverter features:
• Ability to run many of the same appliances that you use at home
You can operate TVs, VCRs, satellite receivers, computers, hair
dryers, and small power tools for example. You can also run multiple
loads up to 1000 watts in total.
• Surge capability
The IP1012 AL will manage loads up to 3000 watts for short periods
of time as long as the peak current is less than 36 amps.
Feature Description
1
Positive terminal with terminal cap on
2
External DC fuse with fuse cover on
3
Ambient Air Temperature sensor
4
AC output connector
5
AC input connector
6
Inverter/charger control connector
7
Negative terminal with terminal cap on
IP1012_AL.book Page 3 Tuesday, May 1, 2007 12:18 PM