Filter
Top Products
Operation
2–10 975-0337-01-01
Switch
indicators lights
The switch indicator lights (i.e., LED) provide information about the
operating state of the inverter/charger. Under normal operating conditions
the lights will behave like this:
1
Float When green LED is solid ON, the charge cycle is
completed. It also means that the Charger On
yellow LED turns off.
2
Charger On When yellow LED is solid ON, it indicates that:
AC shore power is within operating voltage range,
relay is connected from shore power to AC output,
and the charger is actively charging.
AC Low/High When yellow LED is flashing, it indicates that
although AC shore power is present, that it may or
may not be within the operating voltage range.
Refer to Table 4-2, “Charger indicator blink
patterns” on page 4–4 for more information.
3
Inverter On When yellow LED is solid ON, it indicates the unit
is currently inverting. Therefore, the AC output is
active.
Unit Error When yellow LED is flashing, it indicates that a
faulty condition has occurred. Refer to Table 4-3,
“Inverter indicator blink patterns” on page 4–4 for
more information.
Charger indicator
lights
Inverter indicator
light
IP1012_AL.book Page 10 Tuesday, May 1, 2007 12:18 PM