2
Installation
Chapter 2 provides procedures for installing, testing
and configuring the XC Series.
The unit is packed with the following materials:
• Owner’s Guide
• AC cable strain relief
• Two DC cable boots
• Blank plate for remote display cavity
• One battery temperature sensor (BTS)
• Five #6 lockwashers
• Five #6 flatwashers
• Five #6 nuts
After unpacking the unit, record the serial number and
other purchase information on page WA–4 of this
guide.
XC_Charger_Owner.book Page 1 Friday, August 12, 2005 3:23 PM