SKU 92504 For technical questions, please call 1-800-444-3353. Page 10
6. If using only one of the two Air Outlet Valves (4), attach an air hose (not included)
to the Air Outlet Valve. Then, attach the other end of the air hose to the pneumatic
tool that will be used. If using both Air Outlet Valves simultaneously, attach an air
hose to each Air Outlet Valve. Then, attach the other ends of the air hoses to their
respective pneumatic tools. (See Figure E.)
To Start The Air Compressor:
1. Plug the Power Cord Plug (31) into the nearest 220 volt, grounded, electrical
outlet.
2. Pull up on the Power Switch (9) to its “ON” position. (See Figure E.)
3. Turn the Pressure Adjustment Knob (6) clockwise about halfway to its “ON” position.
(See Figure E.)
4. If using only one Air Outlet Valve (4), allow sufficient time for its Pressure Gauge
(5) to indicate at least 80 PSI. If using both Air Outlet Valves, allow sufficient time
for both Pressure Gauges (5) to indicate at least 80 PSI.
(See Figure E.)
PRESSURE
GAUGE
(5)
OIL LEVEL
INDICATOR
(35)
AIR OUTLET
VALVE
(4)
PRESSURE
ADJUSTMENT KNOB
(6)
POWER SWITCH
(9)
AIR
OUTLET
VALVE
(4)
FIGURE E
AIR OUTLET
VALVE
LEVER
AIR
OUTLET
VALVE
LEVER
SAFETY RELEASE
VALVE (3)
0
OVERLOAD
RESET
BUTTON
(42)
