SKU 92504 For technical questions, please call 1-800-444-3353. Page 13
4. NOTE: Each time the Oil Fill Cap (28) is removed, observe the PCV Filter (41) that
is located inside the Oil Fill Cap. When necessary, remove the PCV Filter and clean
with a mild solvent. Allow the PCV Filter to dry. Then, replace the PCV Filter in the
Oil Fill Cap, and screw the Oil Fill Cap back onto the oil fill hole. (See Figure F.)
FIGURE F
OIL FILL HOLE
PCV FILTER
(41)
OIL FILL CAP
(28)
5. Weekly: The Air Compressor is equipped with two Air Filters (38) which should be
cleaned or replaced on a weekly basis. To clean or replace the Air Filters, unscrew
and remove the Wing Nut (36) on the Air Filter Cap (37). Remove the Air Filter
Cap, Air Filter, and Air Filter Bowl (39). Clean the Air Filter with compressed air or,
if necessary, replace the old Air Filter with a new Air Filter. Clean the Air Filter Cap
and Air Filter Bowl with a mild solvent and then dry. Then, replace the Air Filter Bowl,
Air Filter, Air Filter Cap, and Wing Nut. Repeat these procedures for the remaining
Air Filter. (See Figure G.)
FIGURE G
WING NUT
(36)
WING NUT
(36)
AIR FILTER
(38)
AIR FILTER BOWL
(39)
AIR FILTER CAP
(37)
