SKU 92504 For technical questions, please call 1-800-444-3353. Page 4
6. Use safety equipment. Always wear eye protection. Make sure you are wearing
your protective clothing, safety glasses with side shields and dust mask or air
respirator, if appropriate.
TOOL USE AND CARE
1. Do not force the compressor. Use the correct compressor for your application.
The correct compressor will do the job better and safer at the rate for which it is
designed. Never attempt to force the compressor to provide more pressure than it
was designed for.
2. Do not use the compressor if the Power Switch does not turn it on or turn it
off. Any compressor that cannot be controlled with the Power Switch is dangerous
and must be repaired or replaced.
3. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the compressor. Such preventive
safety measures reduce the risk of starting the compressor accidentally.
4. Keep idle compressors out of reach of children and other untrained persons.
Compressors are dangerous in the hands of untrained users.
5. Maintain compressors with care. Keep all components of this product clean
and dry. Do not use a damaged compressor. Tag damaged compressors “Do not
use” until repaired.
6. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the compressor’s operation. If damaged,
have the compressor serviced before using. Many accidents are caused by
poorly maintained compressors.
7. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one compressor may become
hazardous when used on another compressor.
SERVICE
1. Compressor service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.
2. When servicing a compressor, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
