SKU 92504 For technical questions, please call 1-800-444-3353. Page 2
PRODUCT SPECIFICATIONS
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List at the end of
the manual are included. If any parts are missing or broken, please call Harbor Freight
Tools at the number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may
result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Motor
240 V~ / 60 Hz / Single Phase / 4 HP Peak /
3 HP Working / 3,400 RPM / 9 Load Amps /
Two Capacitor (Run & Start)
Overload Reset Button 15 Amp
Power Cord
12 Gauge, 3-Wire (Stripped), 20 Ft. Long
240 Volt Power Cord Plug Not Included.
Air Tank Capacity 29 Gallons
CFM Airflow
16.4 @ 40 PSI / 15.7 @ 70 PSI /
14.5 @ 90 PSI / 13.0 @ 115 PSI
Compressor Pump Type Dual V-Head Cylinder / Belt Driven
Safety Valve Setting 120 PSI
Air Pressure Gauge Indicators 0-200 PSI in 5 PSI Increments
Automatic Shut Off Capability Shut Off at 115 PSI / Starts at 80 PSI
Required Air Quick Connectors (Not Included) Qty. 2 / 1/4”-18 NPT Quick Connectors
V-Belt Size A1118 Li
Base Mounting Holes Qty. 4 @ 1/2” Diameter
Weight 205 Pounds
REV 02/06
