In the FiberMeter model FO602, the SOURCE SETTINGS menu allows the user
to control the options of the light source. The options on this menu will change
based upon the configuration of the installed light source.
1) Press .
2) WAVELENGTH - turns the light source OFF or ON. If multiple
wavelengths are present, this button will cycle through all of the available
wavelengths.
TONE - toggles the TONE option for the currently selected wavelength,
and shows the toning frequency.
AUTO - this option sets the light source into AUTO mode when multiple
wavelengths are present; it is deactivated for single-wavelength
configurations.
3) Press when finished.
An indicator will appear in Immediate Mode (shown in red box at right).
The lightbulb icon indicates whether the light source is in continuous wave (CW) mode (icon stays on), or in
toning mode (icon flashes). The number next to the icon shows the currently selected light source
wavelength.
1-9
FEATURES & FUNCTIONS
UNIT 1
LIGHT SOURCE MENU (FO602 versions only)
WAVE
LENGTH
WAVE
------
OFF
SOURCE
_____________________
SETTINGS
TONE AUTO
---- ----
NONE OFF
TONE
UNITS
FIBER
FBR:123
_____________________
-20
STORE
LINK #1
45
850
Hz
82
68%
dBm
WAVE
850nm
SOURCE SETTINGS
MENU
IMMEDIATE MODE
Light Source Indicator
F1F1
F2F2
F3F3
F1F1
F2F2
F3F3
DONE
