5-10
• Time code output on/off selection while paused
you can select whether to output time code from the [TIME CODE OUTPUT] connector while
paused.
1. Use the jog dial (or [SKIP/CURSOR] [|<<] / [>>|] keys) to select "Pause TC?".
The current setting is shown (the default is “Off”).
2. Press the [ENTER/YES] key.
The currently value flashes and you can now edit it.
3. Use the jog dial (or [SKIP/CURSOR] [I<<] / [>>I] keys) to select “On” or “Off” and press the [ENTER/
YES] key.
Flashing
Flashing
Time code is not output from the [TIME CODE OUTPUT] connector while paused.Off (default setting)
Time code is output from the [TIME CODE OUTPUT] connector while paused.On
4. To exit the TC Setup mode, press the [EXIT/NO] key (or the [STOP] key).
• TC user bit output selection
This menu allows to select the TIME CODE UBIT information attached to the time code output
from the DV40.
The date information on “MDYf” and “DMYf” is taken out from the internal clock on DV40 and
is based on the time when the file is created. “SRNo” information is derived from the 3-digit
REEL NUMBER attached to the VOLUME LABEL set in the “Edit Volume Lbl?” Utility menu or
SCENE/REEL NUMBER set in the “Set SCENE & REEL?” menu.
1. Use the jog dial (or [SKIP/CURSOR] [|<<] / [>>|] keys) to select "TC UBIT Sel?".
The current setting is shown (the default is “SRNo”).
2. Press the [ENTER/YES] key.
The currently value flashes and you can now edit it.
3. Use the jog dial (or [SKIP/CURSOR] [I<<] / [>>I] keys) to select the desired option and press the
[ENTER/YES] key.
You can select from among the following options.
Flashing
Flashing
BG_76543: SSSSS/BG_210: RRR
SRNo (default setting)
BG_76: MM (month)/BG_54: DD (day)/BG_32: YY (year)/BG_10: xx
MDYf (for U.S.A.)
BG_76: DD (day)/BG_54: MM (month)/BG_32: YY (year)/BG_10: xx
DMYf (for European countries)
SSSSS : SCENE No. *SSSSS = sssss (Volume Label sssss) + File No.
RRR : REEL No. (Tape No.)
xx : File No. (Hexadecimal, 01 ~ c7)
