19
If the log space is full, “FULL LOC” message will be displayed and no more
data will be saved.
When LOG is pressed, a complete set of information is stored: date, time, pH
or ppm, mV, temperature and calibration data.
VIEW LOGGED DATA
Press RCL to retrive the information stored while in measurement mode.
If no data were logged, the instrument displays:
Otherwise, the instrument will display the pH, relative mV or ppm value on
the primary LCD and the last stored record number on the secondary LCD,
along with “LOG” tag.
or
or
Pressing the ARROW keys, the instrument will display the same parameter
but for a different record:
Press RANGE and the instrument will display the next logged parameter as
follows:
• The mV value on the primary LCD and the record number on the secondary LCD.
