A SERVICE OF

logo

APP - 23
A
PPENDICES
(4) System errors (1300 to 1399)
These errors are detected at the power-on.
The error codes, causes, processing and corrective actions are shown in Table
1.12.
Table 1.12 System error (1300 to 1399) list
Control mode
Error
code
Control program
Axis designation program
(positioning)
JOG
Manual pulse generator
Home position return
OSC
Error cause
Error
processing
Corrective action
1310
• Initial communication with the Multiple CPU
system did not complete normally.
• Motion CPU fault.
Positioning
control
does not
start.
• Replace the Motion CPU.