A SERVICE OF

logo

Controls
7 - 3
7
.05 Adjustment lever for zigzag stitch and needle position
The zigzag stitch adjustment lever
1
is
used for adjusting the width of the zigzag
stitch.
To change the position of the adjustment
lever, the locking lever
2
must be
pressed against the adjustment lever
1
.
The current zigzag-stitch width
can be seen on scale
3
.
By turning the needle-position
adjustment lever
4
the required needle
position can be set.
L
= needle-position left
M
= needle-position center
R
= needle-position right
7.06 Reverse-feed key
The machine sews in reverse as long as
the reverse-feed key
1
is pressed.
Fig. 7 - 05
4
M
L
R
2
1
3
1
Fig. 7 - 06