Care and maintenance
11 - 3
Switch off the machine!
Danger of injury if the machine is started accidentally!
Only use oil with a mean viscosity of 68.00 m
2
/s at 40° C and a density of
0.881 g/cm
3
at 15° C.
● Check the oil level before each operation.
● If necessary, remove screw
1
and fill in oil up to top marking
2
.
● Tighten screw
1
.
Never allow the oil level to sink below the minimum mark
3
!
Danger of damage to the machine!
To fill in larger quantities of oil, e.g. when filling for the first time before
commissioning, it is better to remove cover
5
.
● Loosen screws
4
and remove cover
5
.
● Take care that no dirt gets into the case.
● Fill in oil up to the top marking
2
.
● Clean the surface of cover
5,
the case and the seal.
● Replace cover
5
and tighten screws
4
.
We recommend PFAFF sewing machine oil, part no. 280-1-120 146.
11.03 Oiling the zigzag drive
Fig. 11 - 04 Fig. 11 - 05
2
1
4
5
4
3
