A SERVICE OF

logo

Open as PDF
next previous
Adjustment
12 - 9
12.05.07 Zigzag stitch width
Requirement
At the largest zigzag stitch setting, marking
1
must be at the largest zigzag value on
scale
2
.
● Turn the zigzag stitch adjustment lever
3
in accordance with the
requirement
.
● Move screw
4
upwards until it touches and then tighten it.
If the machine is equipped with a needle plate with a smaller hole than is
marked on the scale, the zigzag limit must be set according to the needle hole
width on the needle plate.
Fig. 12 - 08
1
2
4
3