3. Input the Memory Lock ID that you will be
using. Example: 6 7 5 4 from the ten key
pad.
4. Store the ID: Yes and Function.
Editing the Memory Lock ID
1. Function 6 2 2 2 2 6 1 and Yes
2. Press until the screen is as shown op-
posite.
3. Yes
4. Yes
5. No and input a new number.
6. Yes and Function.
Switching Memory Lock On/Off
Before you can use Memory Lock, you have to switch it on using Function 62.
After you switch Memory Lock on, ( MEMORY LOCK) will appear on the display
when the machine is in standby mode.
Note: If you switch Memory Lock on, Forwarding will be automatically disabled.
1. Function 6 2 2 2 2 6 2 and Yes.
2. Scroll through the features with until the
screen is as shown opposite.
3. Yes.
4. Change the on/off setting by pressing
or .
5. Finsh : Yes and Function.
If you wish, you can prevent unidentified senders from sending you messages while Memory
Lock is on. See page 129.
RECEPTION ADVANCED FEATURES
126
