Appendix A: Specifications
154
TDS1000/2000-Series Digital Oscilloscope User Manual
Oscilloscope Specifications (Cont.)
Vertical
Analog Bandwidth in
Sample and Average
modes at BNC or with
TDS1002 and
TDS2002
TDS1012,
TDS2012 and
TDS2014
TDS2022 and TDS2024
P2200 probe, DC
Coupled
60 MHz{* 100 MHz{* 200 MHz{*
32° F - 104° F(0° Cto+40° C)
160 MHz{*
32° F - 122° F(0° Cto+50° C)
20 MHz* (when vertical scale is set to < 5 mV)
Analog Bandwidth in
Peak Detect mode
TDS1002 and
TDS2002
TDS1012, TDS2012, TDS2014, TDS2022 and
TDS2024
(50 s/div to 5 s/div**),
50 MHz{* 75 MHz{*
20 MHz* (when vertical scale is set to < 5 mV)
Selectable Analog
Bandwidth Limit,
typical
20 MHz*
Lower Frequency
Limit, AC Coupled
≤ 10 Hz at BNC
≤ 1 Hz when using a 10X passive probe
Rise Time at BNC,
typical
TDS1002 and
TDS2002
TDS1012,
TDS2012 and
TDS2014
TDS2022 and TDS2024
<5.8ns <3.5ns <2.1ns
Peak Detect
Response**
Captures 50% or greater amplitude of pulses ≥12 ns wide typical
(50 s/div to 5 s/div) in the center 8 vertical divisions
{ When vertical scale is set to ≥ 5mV.
* Bandwidth reduced to 6 MHz with a 1X probe.
** The oscilloscope reverts to Sample mode when the SEC/DIV (horizontal scale)
is set from 2.5 s/div to 5 ns/div on 1 GS/s models, or from 2.5 s/div to
2.5 ns/div on 2 GS/s models. The Sample mode can still capture 10 ns glitches.
