Filter
Top Products
13
2011 October
700aks-NA
4-SPECIFICATIONS (continued)
6. Tape Roll Diameter
Up to 406.4mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
®
fi lm tapes.)
7. Tape Application Leg Length – Standard
70mm ± 6mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")
8. Box Board
Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C fl ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)
9. Box Weight and Size Capacities
A. Box Weight, fi lled: 5 lbs.–65 lbs. [2.3 kg–29.5 kg]. Contents must support fl aps.
B. Box Size: Minimum Maximum
Length – 150mm [6.0 inch] Unlimited
Width – 175mm [7.0 inch]* 645mm [25.5 inch]
Height – 120mm [4.75 inch]** 645mm [25.5 inch]
* Boxes narrower than 200mm [8 inches] may require more frequent belt replacement because of limited
contact area.
** Minimum/maximum box height dimensions are with machine at factory setting. To accommodate smaller
or larger boxes, machine upper taping head frame and/or outer column assemblies can be repositioned as
described in "Special Set-Up Procedure" section of this manual. Refer to chart below for box height range
desired and then to illustration indicated for machine upper frame and/or outer column position required.
(continued on next page)