Filter
Top Products
38
16.2 Spare Parts Order
Order parts by quoting the following information:
(Refer to the Identifi cation Plate on the Machine)
• MACHINE MODEL
• SERIAL NUMBER
• FIGURE NO.
• POSITION
• 3M PART NO. (11 DIGITS)
• DESCRIPTION
• QUANTITY
Important!
The machine is constantly revised and improved by our designers. The spare parts catalogue is also periodically
updated. It is very important that all the orders of spare parts make reference to the serial number of the machine
(located on the identifi cation plate on the machine).
The manufacturer reserves the right to modify the machine at any time without notice.
16-TECHNICAL DOCUMENTATION AND INFORMATION (continued)
2011 October
700aks-NA
Replacement Parts Ordering Information and Service
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".
Refer to Manual 2 for recommended taping head spare parts.
Spare Parts – 700aks Adjustable Case Sealer
It is suggested that the following spare parts be ordered and kept on hand:
700aks
Qty. 3M-Part Number Description
2 78-8070-1531-4 Belt-Drive W/Hook
Also see Manual 2
Tool Kit
A tool kit, part number TBA, is supplied with the machine as a stock item. The kit contains the necessary open
end and hex socket wrenches for use with the metric fasteners on the case sealer. The threading tool, part
number 78-8076-4726-4 contained in above kit is also available as a replacement stock item.
Label Kit
In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety. A
label kit, part number 78-8113-6727-1, is available as a stock item. It contains all the safety labels used on the
700aks Adjustable Case Sealer.
Replacement Parts Ordering Information and Service
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".