Filter
Top Products
- 14 -
Shows the LAN port status (UP or DOWN) and the time elapsed from the last state
change (days, hours, minutes and seconds).
Link
Shows the state of the Ethernet LAN port, as the LINK front panel Led.
Speed
Shows the Ethernet interface speed : 100 MBPS on a 100 Base TX, or 10 MBPS for a 10
Base-T network.
Nb RC Frames
Shows the number of Ethernet frames received from the local network.
Nb TX Frames
Shows the number of Ethernet frames sent over the local network.
Nb Broadcasts
Shows the number of Broadcast or Multicast Ethernet frames received from the local
network. These frames are also counted in the number of received frames. These
frames are always transmitted to the remote unit.
Nb Local Frames
Shows the number or frames received from the local network, and filtered as they are
addressed to a local host. These frames are not transmitted to the remote unit.
In this menu, available actions are :
1. Restart the connection : this action aborts the serial link. A new one is started with
the last saved parameters (first menu).
2. Reset counters : reset all frame counters (LAN and WAN)
3. Alarms : displays the 18 last events, dated from the last reset or power-up of the
unit. Time elapsed from last reset is displayed on top of the menu. Events are serial
connection and loss of carrier, (LL active, LL inactive), and connection or loss of link
of the LAN port (DTE active, DTE inactive)