Filter
Top Products
Wireless Multi-Function Access Point
A02-AP-W54 Pag. 35
A.3 Login
If you forget the password to log in
Steps CORRECTIVE ACTION
1
The Reset function is to reset the setting back to factory
default setting, once you press the “RESET” button within 10
seconds, the LED of the WLAN will turn off. And when the
Access Point is ready, the WLAN LED will start blinking.
A
nd the other function is when the AP is locked, press the
reset button to unlock it.
2
Before configurating thisWireless Multi-Function Access Point,
you need to know the following default settings.
Username:
Password :
IP Address : 192.168.1.100
Subnet Mask : 255.255.255.0
Wireless: SSSID= default, Channel=6, WEP=disable