Filter
Top Products
Wireless Multi-Function Access Point
A02-AP-W54 Pag. 2
mixed-mode wireless networks, and up to 50 percent greater throughput
performance in 802.11g only networks.
1.2 Package Contents
Unpack the package and check all the items carefully. If any item contained is
damaged or missing, please contact your local dealer as soon as possible. Also,
keep the box and packing materials in case you need to ship the unit in the future.
The package should contain the following items:
Wireless Multi-Function Access Point
CDRom with Manuals (English, Italian and French)and Quck Start Guide
Quick Start Guide (English)
Cable CAT5 LAN
AC-DC Adapter (5V DC@1,2A)
2 x 2.2 dBi Antennas
Warranty Card
1.3 Wireless Multi-Function Access Point Features
Wireless Multi-Function Access Poin provides the following features:
•
IEEE 802.11g and IEEE 802.11b: With built-in 802.11g access point for
extending the communication media to WLAN while providing the WEP
and WPA for securing your wireless networks.
• Wi-Fi Protected Access (WPA) and WEP encryption
: Thanks to
advanced security functions which are integrated and thanks to the
troughput of the protocol IEE802.11G you are going to have a fast and
flexible wireless net, hacker safe. The chipsets fully support Wi-Fi
Protected Access (WPA) and the IEEE 802.11i draft security standards in
hardware and high-speed encryption engines with no performance
degradation.
•
WDS: A pair of Wireless Multi-Function APs operating under Bridge mode
to act as the bridge that connect two Ethernet networks or Ethernet
enabled clients together. Repeat Mode is able to extend the effective
range and coverage of the wireless network.
•
Nitro GT™: this product implements Intersil Nitro GT™ capabilities to
deliver up to a 3x improvement in throughput for 802.11g clients
operating in mixed-mode wireless networks, and up to 50 percent greater
throughput performance in 802.11g only networks.
•
2 Antennas: 2 x 2 dBi Dipole detachable Antennas (SMA)
•
1 port Fast Ethernet: A fast Ethernet 10/100Mbps port is supported in
the LAN site and automatic switching between MDI and MDI-X for