Filter
Top Products
3. Setup of the B-10 Mobile LED
Image 3-2
Contact key and power cable of pump
2. After several seconds turn-on the generator with this contact key.
Caution: The generator of the B-10 Mobile LED needs to be well-ventilated. Ther
efore, the generator of the B-10 Mobile LED
is not indented to run for a long period o f time with the roof closed. Once the generator is running, the screen needs
to be lifted immediately.
3. Insert the power cable of the hydraulic pump in the generator (Red-plug)
4. Connect the grounding conductor to a grounding rod or other a
cceptable earth grounding method.
3.3 Extending the LED display
Extending process
1. Open the air arrival to start the pump.
22
R5976956 B-10 MOBILE LED 19/06/2007