Filter
Top Products
1. Safety instructions
1.2 Important Safety instructions
Instructions:
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• IMPORTANT, plug holder clamps must be locked firmly on all controller units and power boxes to prevent the possible ingress
of fluids or solid particles. Replace damaged clamps immediately.
• Clean only with materials or chemicals that are inert, nonabrasive, noncorrosive and non-marking. Consult the manufacturer
for further advice should any doubts exist regarding any cleaning procedure.
• Do not block ventilation openings. Install in accordance with the manufacturers instructions.
• Do not defeat the safety purpose of the polarized or grounding type plugs/sockets. If the provided sockets / plugs are damaged
then replacement of the defective parts must be undertaken immediately.
• Protect the power/data cords from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus. Replace damaged power/data cords immediately.
• Only use attachments/accessories specified by the manufacturer.
• Disconnect the power to this apparatus during lightning storms or provide suitable additional lightning protection. Unplug this
apparatus when unused for long period of time.
• Refer all servicing to qualified service technicians/personnel. Servicing is required when the B-10 Mobile LED has been dam-
aged in any way, such as hydraulic mast or generator is damaged, the B-10 Mobile LED does not operate normally.
• Use only with systems or peripherals specified by the manufacturer, or sold with the apparatus. Use ca
ution during transporting
to avoid damage by possible tipping.
• Do not make use of the B-10 Mobile LED to climb on the display.
• Do not place a ladder against the display to access the tiles or for other purposes.
• Do not move the trailer when the B-10 Mobile LED display is in the air.
• Do not walk on the roof of the trailer as it has not been designed and reinforced for this purpose.
1.3 Safety instructions for LED screen setup
Overview
• Only trained people are allowed to set up the LED screen
• No people are allowed around or in the trailer during the setup process of the LED Screen.
• Always put the trailer legs out before lifting the screen.
• Always lock the turntable.
• Always use mechanical locks to lock the turntable.
• Maximum wind force = 8 Beaufort. When the wind force is higher than the maximum allowed wind force, bring the screen down
• Always place the safety pins in the mast.
1.4 Safety instruction when driving the trailer
Overview
• Always stick to the local traffic rules.
• Always respect the local motor vehicle inspection for trailer and car.
• Set draw-bar till trailer level.
• Tires pressure: 3,75 bar
• Max weight under coupling: 150 kg
• Maximum driving speed is 90 km/h. Slow down in the bends.
4
R5976956 B-10 MOBILE LED 19/06/2007