Filter
Top Products
26
G-Converter Chassis
SALES: 0118 965 5100
Supervisor Terminal Emulation
The Manager Card supports several terminal emulations. When connection is made between the
terminal and the RS232 Supervisor port, the following screen will appear:
The terminal type or emulation in use should be selected by pressing the relevant number key on
the PC or terminal. The terminal will then show the basic configuration screen for the chassis’s
set-up.
You may return to this screen at any time by pressing ‘CTRL’ and ‘E’ at the same time.
General set-up Display Layout
There are three main areas on the Supervisor set-up screen used to change parameters for the
Card Cage System:
Upper left –
System parameters
Upper right –
Other display pages which may
be selected.
Bottom –
Configuration.
Please select terminal type from the following:
1 = VT52
2 = VT100
3 = ADDSVP
4 = ADM3A
5 = H1500
6 = N8009
7 = TVI920