Filter
Top Products
34
G-Converter Chassis
SALES: 0118 965 5100
Appendix C - EMC Requirements
To ensure compliance with the EMC directive, some care must be taken to ensure that the units
are installed properly, using suitable screened cables and connections. The following must be
observed:
This product relies on the use of screened cables for connection to the 9 Way 'D-Type'
Supervisor port. The cable must have the foil or braid screen connected effectively to the metal
headshell to ensure continued compliance.
The diagram below illustrates an example of a suitable screen connection. Note how the foil or
braid screen is bent back over the 'C' clip to achieve a pressure contact of the screen against the
shell:
It is important to keep the screen to shell connection as short as possible.
10 Base-T Supervisor Port Connections
Description Type At Connector RJ45 Socket
TxP Output 1
TxN Output 2
RxP Input 3
RxN Input 6