Filter
Top Products
5
Functional Description
1. On/Off switch
2.Lock-onbutton
3. Saw blade locking lever
4. Saw blade
5. Saw blade support roller
6. Shoe plate
7. Bevel angle window
8. Shoe plate beveling lever
9. Dust extraction port
10. “Smart Select
TM” dial
11. Saw blade storage
compart.
12. UV light On/Off button
13. UV light
14. Highlighter marking pen
15. Pen storage
USE OF EXTENSION CORDS
Make sure the extension cord is in good condition before using. Always use the proper
size extension cords with the tool – that is, proper wire size for various lengths of cord and
heavy enough to carry the current the tool will draw. Use of an undersized cord will cause
a drop in line voltage resulting in loss of power and overheating. For proper size cords
see chart below.
MOTOR
Be sure your power supply agrees with nameplate marking. 120 Volts AC only means
your tool will operate on standard 60 Hz household power. Do not operate AC tools on
DC. A rating of 120 volts AC/DC means that you tool will operate on standard 60 Hz AC
or DC power. This information is printed on the nameplate. Lower voltage will cause loss
ofpowerandcanresultinover-heating.AllBlack&Deckertoolsarefactory-tested;ifthis
tool does not operate, check the power supply.
SAVE THESE INSTRUCTIONS
Minimum Gage for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
(0-7,6m)(7,6-15,2m)(15,2-30,4m)(30,4-45,7m)
240V 0-50 51-100 101-200 201-300
(0-15,2m)(15,2-30,4m)(30,4-60,9m)(60,9-91,4m)
Ampere Rating
More Not more American Wire Gage
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 NotRecommended
2
3
7
10
9
11
12
13
14
15
1
8
6
5
4