Black & Decker JS680V Saw User Manual


  Open as PDF
of 36
 
8
Blade storage (gure E)
Abladestoragecompartment(11)isbuilt-into
the side of the saw.
To open the storage door:
-Graspthetabatthetopofthedoorandpull
outward.
The blades are held in place by a magnet.
-Toreleaseablade,pressdownononeend
to raise the other for access.
CAUTION: Close door securely before
operating saw.
Switching on and off
-Toswitchthetoolon,presstheon/offswitch
(1).
-Forcontinuousoperation,presstheon/off
switch(1),pressthelock-onbutton(2)and
release the on/off switch.
-Toswitchthetooloff,releasetheon/
off switch. To switch the tool off, when in
continuous operation, press the on/off switch
once more and release it.
Operating the UV Module (gure F, G & H)
Installing the batteries (gure F)
-PivottheUVmoduledoor(16)awayfrom
thejigsawbyremovingthescrew(17)and
pulling the door forward.
-Insertthreenew1.5VoltAAAalkaline
batteries(18),makingsuretomatchthe(+)
and(-)terminalscorrectly.
-ClosetheUVmoduledoorandreplacethe
screw.
Using the UV light (gure G & H)
The UV module projects a UV light which
illuminates a highlighter line drawn on the
surface of the workpiece.
To use the UV light:
-Markyourintendedcuttinglineusingthe
highlightermarkingpen(14)asshownin
gure G.
e
f
4
11
18
16
17
G
14
 previous next