Filter
Top Products
Icon Application Speed/Orbit Blade Type
Kitchen work surfaces, Fast speed, General wood
work tops, laminate No orbit
board
Scrolling/curves/ Fast speed, Scrolling wood
craftwork, hardwoods, No orbit General wood
decking, flooring
Plywood and wood Fast speed, General wood
panels medium orbit
General timber, soft Fast speed, General wood
wood, fast rip cutting max orbit
Plastics, Perspex, PVC Medium speed, General purpose
medium orbit
Sheet metal tin plate, Low speed, Metal or ceramic or
ceramic tile, fiberglass no orbit fiberglass blade
sheet
Slow speed, Slow speed, Choose the correct
precision start no orbit blade for the application
Setting the desired cutting mode (Smart Select
)(gure D)
To select the proper speed and orbital action
for the type of material that you are cutting,
follow the steps below:
Step1-Turnthedial(10)asshowninfigure
D to the appropriate icon. Refer to the chart
below for descriptions of the 7 different
positions.
Step2-Inserttheproperbladebasedonthe
chart.
Step3-Performthecut.
NOTE: These settings are initial
recommendations. Your application may
work best with different settings. Test
these positions on similar material prior to
making nished cut and adjust selections
for desired results.
7
D
How to use the Smart Select
TM
dial
This tool is equipped with a unique Smart Select
TM
Dial to set the speed and the orbital
blade action for various cutting applications. To select the optimum speed and orbital
blade action for the type of material being cut, turn the dial as shown in the table below.
10
PVC
3200/min3200/min
3000/min
3000/min
2300/min1700/min