Filter
Top Products
Set-Up (Cont.)
cleans up with something other
than water), you should flush the
system with the cleaning fluid rec-
ommended by the coating manufac-
turer. To flush the system, follow the
instructions for priming – see Page
8. Allow the sprayer to run in the
prime position until you see clear
cleaning fluid coming through the
bypass tube. Also perform this pro-
cedure after the unit has been
stored with a storage fluid such as
Pump Protector.
When Painting Outside
It is best not to spray outside on a
windy day. The sprayer creates a
fine mist of coating and some of the
mist can be carried in the wind onto
cars, shrubbery, etc. To protect your-
self from overspray, use a respirator
and safety glasses.
Painting Houses, Garages, Etc.
Move or cover any object or planti-
ng that could be damaged. Use
newspaper (taped in place) or plas-
tic sheeting to protect windows,
Operating Instructions & Parts Manual
www.chpower.com
6
light fixtures, etc. that are not to be
painted the same color as the struc-
ture. For best results, remove any
hinges or fixtures – it may prove less
time consuming than covering them.
Painting Fences
Move or cover any object or planting
that could be damaged. Remove or
cover hinges, handles or other hard-
ware that you don’t want to paint.
When Painting Inside
To protect yourself from overspray,
use a respirator and safety glasses.
Protect the areas outside of the
room being painted by hanging
plastic sheeting in the doorways.
Floors, Ceilings, Walls
Spraying is extremely efficient when
tackling items such as floors or pop-
corn ceilings. Use tape and newspa-
per or plastic sheeting to protect
windows, light fixtures, etc. that are
not to be painted the same color.
Wear protective shoes, not open
shoes like sandals. Be careful not to
accidentally spray feet.
Figure 8 – Cover plantings that could
be damaged
Figure 9 – Using the 24” Spray Wand
accessory