Filter
Top Products
Coil Roofing
Nailer
EMPLOYER’S RESPONSIBILITY:
Distribute this instruction manual to all
users before allowing use of the nailer.
Ensure all operators read, understand
and follow all safety warnings, labels
and instructions outlined in this manual.
Danger
indicates
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
●
Do not use any type of
flammable gases or
oxygen as a power
source for the nailer.
Use filtered, lubricated,
regulated compressed air only. Use
of a compressed gas instead of
compressed air may cause the nailer
to explode which will cause death
or serious personal injury.
● Do not exceed maxi-
mum operating pressure
of the nailer (120 psi).
The nailer will not func-
tion properly. Do not
use a compressed air
source capable of more than 200 PSI.
The nailer could explode which will
cause death or serious personal injury.
● Never use gasoline or
other flammable liquids
to clean the nailer.
Never use the nailer in
the presence of flam-
mable liquids or gases. Vapors could
ignite by a spark and cause an
explosion which will result in death
or serious personal injury.
● Always remain in a
firmly balanced posi-
tion when using or
handling the nailer.
● Do not modify or
disable the Work
Contact Element
(WCE). Do not tie or
tape the WCE or
trigger in a
depressed position.
Death or serious personal injury
could result.
Description
This nailer is designed for roofing
(asphalt and fiberglass shingles), reroof-
ing, and sheathing installation. Features
include: convenient top loading maga-
zine which holds up to 120 nails, an
adjustable shingle guide, a rubber han-
dle grip, an adjustable depth of drive
mechanism and adjustable exhaust.
General Safety Information
This manual contains safety, operational
and maintenance information.
Read this manual and under-
stand all safety warnings and
instructions before operating
the nailer. Contact your
Campbell Hausfeld represen-
tative if you have any questions.
CALIFORNIA PROPOSITION 65
You can create dust when you
cut, sand, drill or grind materi-
als such as wood, paint,
metal, concrete, cement, or other mason-
ry. This dust often contains chemicals
known to cause cancer, birth defects, or
other reproductive harm. Wear protec-
tive gear.
Excessive
exposure to vibration, working in awk-
ward positions and repetitive work
motions can cause injury to hands and
arms. Stop using any tool if discomfort,
numbness, tingling or pain occur and
consult a physician.
OPERATOR’S RESPONSIBILITY:
Before operating the nailer, read and
understand all safety warnings and
labels. Follow the operating instruc-
tions outlined in this manual.
Operating Instructions Model RN164500
● Do not touch the trig-
ger unless driving nails.
Never attach air line to
nailer or carry nailer
while touching the
trigger. The tool could
eject a fastener which will result in
death or serious personal injury.
Warning
indicates
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
●
Always discon-
nect nailer from
air line before
clearing jams,
adjusting or ser-
vicing the nailer, relocating the
nailer, or when the nailer is not in
use. Always reconnect the air line
BEFORE loading any fasteners. The
nailer could eject a fastener causing
death or serious personal injury.
● Protect your eyes and
ears. Wear Z87 safety
glasses, with side
shields. Wear hearing
BUILT TO LAST
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death
and/or property damage! Retain instructions for future reference.
Model RN164500
IN718600AV 3/07
Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National
Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2007.
© 2007 Campbell Hausfeld
Table Of Contents
General Safety . . . . . . . . . . . . . . . . .1-2
Specifications . . . . . . . . . . . . . . . . . . . .2
Contact Trip Safety Mechanism . . . . .3
Operating The Nailer . . . . . . . . . . . .3-5
Troubleshooting . . . . . . . . . . . . . . . . .6
Warranty . . . . . . . . . . . . . . . . . . . . . . .7
8-Sp
Modelo RN164500
Notas
Manual de Instrucciones
Locate model and serial number on
tool and record below:
Model No. ________________________
Serial No. _________________________
Retain these numbers for
future reference.
MANUAL
O
CO
2
120 psi
MAX.