Filter
Top Products
Page 16SKU 41213 For technical questions, please call 1-800-444-3353.
MAINTENANCE AND SERVICING
Risk of serious personal injury from accidental starting
or electric shock. Turn the Power Switch of the tool to its
“OFF” position and unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning
procedures.
Damaged equipment can fail, causing serious personal
injury. Do not use damaged equipment. If abnormal noise or
vibration occurs, have the problem corrected before further
use.
Cleaning, maintenance, and lubrication
BEFORE EACH USE, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, dam-
aged electrical wiring, and any other condition that may affect its safe operation.
AFTER USE, clean external surfaces of the tool with clean, moist cloth.
WARNING! If the supply cord of this power tool is damaged, it must be
replaced only by a qualied service technician.
Troubleshooting
Problem Possible Causes Probable Solutions
Tool will not start No power at outlet.
Cord not connected.
1.
2.
Check power at outlet.
Check that cord is plugged in.
1.
2.
1.
2.
3.
WARNINGWARNING
MAINTENANCE CHART
Maintenance Type
Before
Use
After
Use
Weekly Monthly
Every 6
Months
Yearly
Inspect tool for damage
(see #1, above)
X
Wipe off with clean, moist
cloth
X X X X X