Filter
Top Products
Page 6SKU 41213 For technical questions, please call 1-800-444-3353.
(1)
Do not force the Polisher/Sander. This tool will do the work better and safer at
the speed and capacity for which it was designed. Do not force the pads into the
vehicle being waxed/polished. Apply moderate pressure, allowing the Bonnet to
rotate freely without being forced.
When waxing/polishing a vehicle, do not operate the vehicle’s engine in an
enclosed area. Carbon monoxide is a colorless, odorless, vapor emitted
from a vehicle’s running engine that may cause severe injury or death if
inhaled.
Never lay the Polisher/Sander down until the Polishing Pad (2) has come to
a full stop. The Backing Pad can grab the surface and pull the tool out of your
control.
Make sure the vehicle being waxed/polished is free from burrs and any
other foreign matter which could damage the tool.
Always unplug the Polisher/ Sander from its electrical outlet before per-
forming any inspection, maintenance, or cleaning procedures.
When sanding, only use 7” sanding pads with a hook and loop back that at-
taches securely to the Backing Pad.
Connect to a GFCI. Always connect the Line Cord to a Ground Fault Circuit
Interrupter (GFCI) protected electrical outlet.
Accessories must be rated for at least the speed recommended on the tool
warning label. Wheels and other accessories running over rated speed can y
apart and cause injury.
Hold tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact
with a “live” wire will make exposed metal parts of the tool “live” and shock
the operator.
Never use accessories rated for less than 3500 RPM.
WARNING! Avoid serious injury. Never install carbide tipped or steel
circular saw blade for use on this Sander/Polisher. Never install a wood carv-
ing blade, carving disc with saw chain cutters, or a cutting carving disc on this
Sander/Polisher. Never install abrasive cutoff discs and wheels, ap wheels, wire
brushes, or wire wheel brushes.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.