Chicago Electric 92880 Power Hammer User Manual


  Open as PDF
of 16
 
Page 11For technical questions, please call 1-800-444-3353.SKU 92880
Figure 10
5. Pass the end of the Flexible Shaft Core


and hold it down while tightening the
Collet Nut with the Wrench.
When the Collet Nut is tight, release the 6.

Shaft Attaching Nut clockwise onto the
tool body until hand tight.
Installing a Bit in the Flexible Shaft
Wrench

Figure 10

Tighten
1. 
Flexible Shaft Core from turning by
inserting it into the hole in the side of the
Flexible Shaft Handle.
2.
the Collet locking nut by turning it
counterclockwise with the Wrench.
Place the bit into the appropriate sized 3.
collet. Place the collet into the end of the
Flexible Shaft Handle. Place the Collet

turning clockwise. Tighten in place using

hold back.
Installing or Removing Collars
The Front Collar (3) is interchangeable

Figure 10
1. 
remove the standard collar by turning


Note: When installing or removing, use only

hand. Do not overtighten, as this may
damage the part.
2.

the Rotary Tool.
Figure 10
3. Using a phillips screw driver, open the
battery compartment.
Figure 10
4. Replace the batteries with the same type

VDC batteries). Be sure to match the
polarity marking in the battery
compartment.
REV 10e
 previous next