Filter
Top Products
Page 5For technical questions, please call 1-800-444-3353.SKU 92880
REV 10e
Damaged accessories will normally
break apart during this test time.
Wear personal protective equipment. 7.
Depending on application, use face
shield, safety goggles or safety
glasses. As appropriate, wear dust
mask, hearing protectors, gloves
and workshop apron capable of
stopping small abrasive or work piece
fragments. The eye protection must
be capable of stopping ying debris
generated by various operations.
The eye protection must be capable
various operations. The dust mask or
particles generated by your operation.
Prolonged exposure to high intensity
noise may cause hearing loss.
Keep bystanders a safe distance away 8.
from work area. Anyone entering
the work area must wear personal
protective equipment. Fragments of
work piece or of a broken accessory
immediate area of operation.
Never lay the power tool down until 9.
the accessory has come to a complete
stop. The spinning accessory may grab
the surface and pull the power tool out of
your control.
Do not run the power tool while 10.
carrying it at your side. Accidental
contact with the spinning accessory
could snag your clothing, pulling the
accessory into your body.
Regularly clean the power tool’s air 11.
vents. The motor’s fan will draw the
dust inside the housing and excessive
accumulation of powdered metal may
cause electrical hazards.
Do not operate the power tool near 12.
ammable materials. Sparks could
ignite these materials.
Do not use accessories that require 13.
liquid coolants. Using water or other
liquid coolants may result in electrocution
or shock.
Maintain labels and nameplates on 14.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. 15. Prepare
to begin work before turning on the tool.
Do not depress the spindle lock when 16.
starting or during operation.
Use clamps (not included) or other 17.
practical ways to secure and support
the workpiece to a stable platform.
Holding the work by hand or against your
body is unstable and may lead to loss of
18. The battery charger gets
hot during use. The
charger’s heat can build up to
hazard if it does not receive adequate
ventilation, due to an electrical fault, or if
it is used in a hot environment. Do not
surface. Do not obstruct any vents on
the charger. Especially avoid placing
the charger on carpets and rugs; they
are not only ammable, but they also
obstruct vents under the charger.
This product is not a toy. 19. Keep it out
of reach of children.
People with pacemakers should 20.
consult their physician(s) before
use.
proximity to heart pacemaker could