Filter
Top Products
Page 12 For technical questions, please call 1-800-444-3353. SKU 92880
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Charge the Battery Pack (18) and insert 1.
it in the tool, as described in the previous
section.
Select an appropriate bit or attachment 2.
described in the previous section.
3.
turned on by moving the switch on the
collar.
Figure 10
4. Rotate the Switch (8) to the ON position.
NOTE: This is a variable speed switch.
The tool bit speed is dependent on the
position of the Switch. Use a speed
appropriate to the bit and the material
being worked on. In general, harder
materials require faster speeds and softer
materials require slower speeds. Relative
speeds are indicated by the numbers on
the Switch.
Apply the tool bit to the work material as 5.
needed.
When the task has been completed, stop 6.
the tool by rotating the Switch (8) to the
light is ON, switch it OFF. Unplug the
rechargeable battery. Remove the bit or
attachment as discussed in the previous
section.
Store the tool, its battery, and its bits and 7.
attachments in their case in a safe location.
Dispose of used batteries properly. 8.
Consult your local hazardous waste
authority for disposal guidelines.